User`s guide

1: BSCDEMO Commands
DC 900-1349B 21
WRITE Write to the specified link. The /FILE option is the default.
/ESC Add simulated IBM 3780 print control sequences (<ESC>/) at
the beginning of each line.
/FILE A text file on a disk is opened and its contents sent to the ICP.
BSCDEMO prompts for the file name (maximum length of 80
characters). No special formatting is performed. Records are
not split.
/HEX Allows you to formulate a message in hex at the terminal.
BSCDEMO prompts for the message.
/ID SWIFT signon ID.
/LAST Send last block as ETX instead of ETB.
/MESSAGE Allows you to formulate a test message at the terminal.
BSCDEMO prompts for the message.
/PRIORITY Send as priority data (BSC 3780 only).
Note: The message will be received as normal data.
/RECORDS Send transparent BSC 2780 records.
/RS Uses record separators (RS) to terminate each line instead of
<CR><LF>.
/SIGNON Send a signon bid/response/completion command.
BSCDEMO prompts for the signon ID.
/TEST Send a prepared test message.
/US Uses unit separators (US) to terminate each line instead of
<CR><LF>.
/X Send data transparently.
Z Change the communications server’s device name.
Table 1–1: BSCDEMO Commands and Options (Cont’d)
Command Option Description