User`s guide

20 DC 900-1349B
BSCDEMO User’s Guide
SEND Send EOT on link.
/ACK Send a positive safe store acknowledge command (ACK0 or
ACK1, size = 0). Used to accept a received data message when
using the safe store option. See also INHIBIT/ACK command.
/DISCONNECT Send disconnect (DLE EOT).
/NAK Send a safe store negative acknowledgment command (size >
0). Used to reject a received data message when using the safe
store option.
/POLL Send poll line with no data command. A data acknowledge
response will be generated. Or issue a BSC 3270-specific poll to
the control unit and device. There is no data-acknowledge
response generated by a specific poll.
TABLE Set or read an ASCII-to-EBCDIC translation table.
/READ = n Read table n.
/SET = n Set table n. A SET/READ = n command must be performed
first to provide the database to be changed.
TIMEOUT = n Change the read timeout length where n = 1–59 seconds.
Default value is 2 seconds.
UNBIND See the DISABLE command.
UNIT Display the current control unit and device number.
/CU = n Change control unit where n = new unit (BSC 3270 only,
n = 0–31).
/DU = n Change device number where n = new device (BSC 3270 only).
VERSION Read software version ID.
Table 1–1: BSCDEMO Commands and Options (Cont’d)
Command Option Description