User`s guide

1: BSCDEMO Commands
DC 900-1349B 17
/P30 = n DSR/DCD delay where valid values are n = 0–127 seconds.
/P31 = n TTD/WACK limit where valid values are n = 1–8192 for
SWIFT or 0-127 for BSC 3780.
/P32 = n Disconnect timer length where valid values are n = 0–1800
seconds.
/P33 = n Line mode where valid values of n are:
0 = Bisync
1 = Async/Bisync
2 = 8-bit Async
3 = 7-bit Async
4 = 6-bit Async (Baudot)
5 = 5-bit Async
6 = 8-bit Isochronous
Available only on FMP.
/P34 = n Asynchronous terminating character where valid ASCII values
are n = 0–255. Available only on FMP.
/P40 = n Electrical interface where valid values of n are:
0 = EIA-232
1 = EIA-485
2 = EIA-530/EIA-449 (balanced, EIA-422)
3 = V.35
4 = EIA-449 (unbalanced, EIA-423)
5 = EIA-562
Available only on Freeway 1000.
/P41 = n Line type where valid values of n are:
0 = leased
1 = dial up
/X
/ENABLE
/START
Start link after configuration options on the same command
line have been set. Not available on SWIFT or CHIPS.
DETACH Detach a client from a link.
DEVICE Notify BSC 3270 software of device status.
/CREATE Create BSC 3270 device.
/REPORT Generate device status report.
/STATUS Change device status.
DIAL
MODEM
Perform modem autodial. BSCDEMO prompts for the dial
string.
Table 1–1: BSCDEMO Commands and Options (Cont’d)
Command Option Description