User`s guide

16 DC 900-1349B
BSCDEMO User’s Guide
/P20 = n Block checking where valid values of n are:
0 = off
1 = exclude first character
2 = include first character
3 = SWIFT
/P21 = n Read queue limit where valid values are n = 0–4096
(0 = no limit).
/P22 = n EOM line control where valid values of n are:
0 = reverse line
1 = hold line
2 = permanent hold
Available only on BSC 3780.
/P23 = n Data acknowledge node where valid values of n are:
0 = off
1 = on
/P24 = n Alternating acknowledgment where valid values of n are:
0 = off
1 = on
/P25 = n Inter-poll delay where valid values are n = 0–8192 tenths of
seconds. Available only on BSC 3270.
/P26 = n TTD/WACK where valid values of n are:
0 = off
1 = on
2 = send TTD only (not WACK)
3 = send WACK only (not TTD)
Available only on BSC 3780.
/P27 = n BSC 3270 addressing where valid values of n are:
0 = off
1 = on
2 = reserved
3 = automatic printer emulation
4 = device emulation
Available only on BSC 3270.
/P28 = n RVI handling where valid values of n are:
0 = continue
1 = abort
/P29 = n Sync insertion every n characters where valid values are
n = 0–4096 (0 = off).
Table 1–1: BSCDEMO Commands and Options (Cont’d)
Command Option Description