User`s guide

1: BSCDEMO Commands
DC 900-1349B 15
/P10 = n Set data translation table where valid values of n are:
0 = off
1 = table 1
2 = table 2
/P11 = n Station status where valid values of n are:
0 = master
1 = slave
/P12 = n Space compression where valid values of n are:
0 = off
1 = on
/P13 = n Conversational mode where valid values of n are:
0 = off
1 = on
/P14 = n Retry limit where valid values are n = 1–127.
/P15 = n Poll list delay where valid values are n = 0–8192 tenths of
seconds. Available only on BSC 3270.
/P16 = n Modem control where valid values of n are:
0 = HDX
1 = FDX (monitor DSR)
2 = HDX-2
3 = FDX-2 (ignore DSR/DCD)
4 = HDX-3
5 = FDX-3 (monitor DCD)
6 = HDX-4 (monitor DSR/DCD)
7 = FDX-4 (monitor DSR/DCD)
/P17 = n Safe store where valid values of n are:
0 = off
1 = on
/P18 = n Station ID where valid values are n = 0–32 for BSC 3270 and
n = 0–999 for FMP sequence numbers.
/P19 = n Message blocking where valid values of n are:
0 = off
1 = data
2 = 2780 records
3 = 3780 records
4 = 3270 CMDS
Table 1–1: BSCDEMO Commands and Options (Cont’d)
Command Option Description