User`s guide

14 DC 900-1349B
BSCDEMO User’s Guide
/P2 = n Clock source where valid values of n are:
0 = external
1 = internal
2 = bypass
/P3 = n Reply timer length where valid values are n = 0–1800 seconds.
/P4 = n Number of leading SYNCs where n = number of SYNCs sent
out before a Bisync control or data sequence. Valid values are
2–8.
/P5 = n Protocol where valid values of n are:
0 = BSC 2780/3780
1 = BSC 3270
2 = FMP
3 = HASP
4 = SWIFT
5 = CHIPS
Warning: SWIFT and CHIPS reset all default options upon
receiving this option; therefore it should always be first in the
command line list.
/P6 = n Parity where valid values of n are:
0 = no parity
1 = odd
2 = even
/P7 = n Character set where valid values of n are:
0 = ASCII/LRC-8
1 = EBCDIC/CRC-16
2 = ASCII/CRC-16
3 = ASCII/LRC-8/Bit7
4 = EBCDIC/CCITT-0
5 = ASCII/CCITT-0
/P8 = n Link transmission buffer size where valid values are
n = 64–4096 bytes.
/P9 = n Record separator translation where valid values of n are:
0 = no translation
1 = NL = <CRLF>
2 = RS = <CRLF>
3 = US = <CRLF>
Table 1–1: BSCDEMO Commands and Options (Cont’d)
Command Option Description