Installation guide

4: Commands and Responses
DC 900-1564A 47
4.4.2 Get Link Configuration
The DLI_PROT_GET_LINK_CFG command requests the current configuration of a speci-
fied SLC network connection. The ICP
DLI_PROT_GET_LINK_CFG response contains the
requested configuration information. The header formats are detailed in Section 5.7 on
page 69.
When the application writes a
DLI_PROT_GET_LINK_CFG command to the ICP, it does so
with a zero-length data area. When the ICP replies to this command, the data area of the
DLI_PROT_GET_LINK_CFG response contains a specification list of all applicable configu-
ration options for the specified SLC network connection. See Section 4.2.3 on page 36.
4.4.3 Get Software Version
The DLI_PROT_GET_SOFTWARE_VER command requests software version information
from the protocol service on the ICP. The ICP
DLI_PROT_GET_SOFTWARE_VER response
contains the requested version information. The header formats are detailed in
Section 5.8 on page 70.
When the application writes a
DLI_PROT_GET_SOFTWARE_VER command to the ICP, it
does so with a zero-length data area. When the ICP sends the corresponding
DLI_PROT_GET_SOFTWARE_VER response, the data area contains a “c” format text string
containing embedded new-line characters (‘\n’) and is terminated by a null (‘\0’)
character.
4.4.4 Get Statistics Report
The DLI_PROT_GET_STATISTICS_REPORT command requests statistics for a specified SLC
network connection. The ICP
DLI_PROT_GET_STATISTICS_REPORT response contains the
requested statistics. The header formats are detailed in Section 5.8 on page 70.
When the application writes a
DLI_PROT_GET_STATISTICS_REPORT command to the ICP,
it does so with a zero-length data area. The ICP
DLI_PROT_GET_STATISTICS_REPORT
response data area contains statistics for the specified SLC network connection using