Installation guide

12 DC 900-1564A
Synchronous Link Control (SLC) Programmer’s Guide
Chapter 5 is the SLC protocol reference providing specific header formats for all SLC
commands and responses.
Chapter 6 describes some SLC programming considerations and summarizes SLC error
codes.
Appendix A shows the SLC include file contents.
Simpact References
The following documents provide useful supporting information, depending on the
customer’s particular hardware and software environments. Most documents are avail-
able on-line at Simpact’s web site, www.simpact.com.
General Product Overviews
•
Freeway 1100 Technical Overview 25-000-0419
•
Freeway 2000/4000/8800 Technical Overview 25-000-0374
•
ICP2432 Technical Overview 25-000-0420
• ICP6000X Technical Overview 25-000-0522
Hardware Support
•
Freeway 1100 Hardware Installation Guide DC 900-1370
•
Freeway 2000/4000 Hardware Installation Guide DC 900-1331
•
Freeway 8800 Hardware Installation Guide DC 900-1553
•
Freeway 2000/4000 Hardware Maintenance Guide DC 900-1332
•
Freeway ICP6000/ICP6000X Hardware Description DC 900-1020
•
ICP6000(X)/ICP9000(X) Hardware Description and Theory of
Operation
DC 900-0408
• ICP2432 Hardware Description and Theory of Operation DC 900-1501
•
ICP2432 Hardware Installation Guide DC 900-1502
Freeway Software Installation Support
•
Freeway Server User’s Guide DC 900-1333
•
Freeway Software Release Addendum: Client Platforms DC 900-1555
Leslie — See
about making
Chapter 6
cover error
codes only
(merge other
info into
Chapter 2)?
7/2: We’re
saving this
until last to
decide.
7/2/98 Leslie:
Creation
Permanent
Reminder:
Remove all
protocol docs
except the
applicable
one(s). For
non-Simpact
refs, make
another
No#Head2
heading
called “Other
References.”
Techpubs:
Don’t delete
the “Other
Helpful
Documents”
(separate
table at end of
References).
Also set “space
below” on first
table = 0 pt.