Product Description

Wireless Keypad: TRA.PINCODE
Page 13
9.0 Opening
In order to use the Wireless Keypad to open the appropriate lock, proceed as follows:
Enter a PIN that has already been programmed. You are not permitted to wait more
than 5 seconds between the entries of the individual numbers.
If you have entered the correct number and the integrated transponder has been
programmed, the LED lights GREEN and a signal is sounded. Then the integrated
transponder opens the lock.
10.0 Meaning of the LED
The built-in LED can light in one of three colors: green, yellow or red. These colors
have the following meanings:
• Green Digit that was input has been accepted
PIN input was OK, which means that the correct PIN has been
recognized and an open signal is being sent
PIN length OK
PIN programming procedure was successful
• Yellow Battery warning
• Red PIN input was incorrect
Input of master code was incorrect
Repeated incorrect input of the PIN (manipulation)
PIN length was not entered correctly.