User Manual

SV1C Cylindrical RF Lock
Page 16
Strike Installation (Wood Frame Only)
A. Close door and mark a horizontal line from the center of the template to the frame of
the door.
B. Measure half the thickness of the door; mark this same distance with a vertical line
starting from the stop side of the frame and where both lines cross make a 1” (25mm)
diameter hole and 1/2” (13mm) in depth.
C. Align the holes of the strike with the vertical line, trace the outline of the strike and
mortise to 1/16” (1.6mm) depth. Attach the strike with two screws (provided).