User manual

MANUAL LSM MOBILE
Version: Juli 2010 V1.0
Page 7
2.0 INTRODUCTION
2.1. PRODUCT DESCRIPTION
LSM Mobile is a software which was specially developed for operation with a
Windows Mobile 5.x PDA (Personal Digital Assistant) with Bluetooth interface in
conjunction with a SmartCD programming device. You can use it to conveniently and
wirelessly program and read all digital locking components from the SimonsVoss
system 3060. Please also read the current manuals for the software product used.
Note
This manual contains a number of SmartLSM screenshots. These also apply to LSM
Mobile.
2.2. FUNCTIONS OF LSM MOBILE
2.3. PROGRAMMING LOCKS
The locking plan is created in the LSM Mobile version 3.0 using the locking plan
software LSM version 3.0 (or higher) and is programmed into the components.
Subsequent changes to authorisations are made in the locking plan software and are
then transferred to the Pocket PC. You can then program the locks using the
programming device. Once programming is complete, transfer the updated data to
your PC using the locking plan software’s import function.
2.4. READING THE LOCK
You can read access and transponder lists on-site using the programming device in
conjunction with a Pocket PC.
2.5. RESETTING LOCKS
You can reset locks to the factory setting.
2.6. OPENING THE DOOR
Emergency opening using a special emergency opening password (enter in LSM
when exporting data) is also possible.
Other functions are explained later on in this manual.