User manual

MANUAL LSM MOBILE
Version: Juli 2010 V1.0
Page 48
LSM Mobile
Software for a handheld / PocketPC for mobile management and programming of the
locking system.
M
Matrix
The matrix is the graphical view of authorisations in LSM.
N
Network
The SimonsVoss network enables the locks to be directly addressed without the
programming device.
Network address
The network address allows you to clearly recognise each lock node, which is fitted
on the door and stored in the software as being assigned to the door.
O
OMRON mode
All product versions can be operated in OMRON mode. If you would like the Smart
Relay to transfer the transponder data to an external system and a remote opening
command to be sent to the cylinder when transfer is activated from the Smart Relay
by the external system, select this option on both the Smart Relay and the cylinder.
Please note: If you use this configuration, it is no longer possible to open the cylinder
using the transponder! Please refer to the Smart Relay Manual for an exact
description.
Overlay mode
In overlay mode 8 transponder IDs are reserved for a created transponder and
programmed into the authorised locks. If the first transponder is lost, the transponder
ID is deactivated in the software and the new transponder is assigned the next
transponder ID from the reserve TIDs. When the transponder is used to open a lock,
the system recognises that this is one of the 7 reserve TIDs and deactivates the
previous transponder ID.
P
Password
The security of passwords depends on the complexity and length of the password.
Passwords are used to protect the locking system in several parts of the system
Period of validity
The period of validity is a time frame in which the transponder will function. The
transponder is inactive outside this time frame.
Person
Person allows you to store additional information about a user.