User manual

MANUAL LSM MOBILE
Version: Juli 2010 V1.0
Page 43
The first time an action is undertaken with LSM
Mobile, the software checks the SmartCD’s
battery status.
Solution:
if this message appears, connect your
programming device to your PC/notebook’s
USB interface and charge the batteries.
Note:
the battery status is also checked at regular intervals when working with the software.
This message appears on your PDA if your
programming device is still connected to the
PC/notebook but you would like to use your PDA
to work with the programming device.
Solution:
disconnect your programming device from the
PC/notebook, then press the Bluetooth key on the
programming device and try again.