User manual

MANUAL LSM MOBILE
Version: Juli 2010 V1.0
Page 37
5.3. READING ACCESS AND TRANSPONDER LISTS
Select the corresponding task, e.g. “Read access list” and follow the instructions.
Once the data has been imported into LSM, the data is also available there for the
corresponding lock.
• If you have already read a lock’s access or transponder list and click on one of the
corresponding buttons again, you are asked whether you would like to read the
list again or view the saved version.
5.4. REPLACING A DIGITAL LOCK
If you would like to reset a lock to replace the digital component, for example, select
the Reset task. You will require the locking system password to do this. LSM Mobile
now provides you with the opportunity to reset a lock and replace it with a new one
without knowing the password. During the export process, the locking system
password is saved in LSM Mobile for this purpose, so that you are asked if you want
to take the password from the database or enter it manually when resetting the lock.
It is therefore not necessary for the person programming or replacing locks to know
the locking system password.
When replacing a lock which cannot be reset, it is not possible for the software to
program the new lock first. This lock must be reset manually in the locking plan for
this purpose.
Select the corresponding lock and the “Change IDs” task and click on Run. A security
question appears, asking whether you really want to run this task.
LSM Mobile now shows the target and actual values for the lock. Set both actual
values to “zero”. To do this, select the corresponding number. Highlight it and replace