Product manual

PRODUCT MANUAL

TRANSPONDER 3064

6 BATTERY REPLACEMENT

6.1 Battery Replacement 3064

The transponder battery can be replaced at any time when the battery warning is ac-

tive (see Locking Cylinder 3061 Manual – Battery warning). Open the casing careful-

ly, so that you can find the battery easily. Open the battery holder and remove the

battery. Insert new battery and close battery holder. Press the casing back together

again.

When changing the battery, you must ensure that you do not take more than two

minutes, that you do not press the transponder button during this time and that you do

not cause a short circuit, otherwise you may cause data to be lost.

6.2 Battery replacement for explosion protection transponder

! Only SimonsVoss Technologies GmbH may replace the battery in this tran-

sponder.

7 LOSS OF THE TRANSPONDER

7.1 Emergency opening

An emergency opening may be carried out with the Smart CD and PDA and by enter-

ing the locking system password.

7.2 Replacement transponder [G1]

If a transponder is lost, it can be blocked in the locking plan and a replacement tran-

sponder added. If the locking system is operated in overlay mode [G1], the lost tran-

sponder is blocked automatically as soon as the replacement transponder is activated

at the digital lock (see Software Operating Instructions for programming and proce-

dure).