Unit installation
Transponder 3064
Page 5
2.0 Special Models
2.1 Password Transponder
Instead of manually entering the locking system password, you can transmit it over
radio frequency with the help of a special transponder. Standard transponders cannot
be used as password transponders.
2.2 Switching Transponder
With this transponder, a two-wire cable (approx. 1m or 37 inches) is connected to the
switch contacts of the button and guided outside the device. When both wires are
connected, the transponder switches through.
Application examples:
• Connecting external systems
• Remote triggering of a Digital Locking Cylinder or Smart Relay
• Block Lock Function 3066: System activation from more than one location
2.3 Explosion Protection Transponder
This is a transponder with the same functions as the Transponder 3064. In addition,
this transponder is released for use in explosion protection zone 1.
(Note Chapter 3 in this regard).
2.4 SmartClip
The special design of this transponder means that the SmartClip is suitable for
holding an ISO 7816 format card.
2.5 Transponder, bonded
The standard transponder as described above, but with a glued-shut casing. This
prevents end-users from opening the case and using the transponder electronics
improperly.
2.6 Transponder, numbered
Sequentially numbered transponders can also be ordered if required.