Unit installation

WaveNet Radio Network 3065
Page 20
Der WaveNet LockNode sollte in
Höhe des Schließzylinders
angebracht werden. (Einbau
vorzugsweise in Standard-
Unterputzdose und
Lichtleistenrahmen mit
Blindabdeckung
10.0 Installing WaveNet Lock Nodes
• The optimum radio signal range of RNs and LNs is generally achieved by
fitting the Router Nodes so that their antennas point vertically upwards or
downwards, and the Lock Nodes are fitted such that the lettering is horizontal,
enabling you to read it normally.
The distance from the locking cylinder must be
kept as small as
possible, although there should be at least 3 cm
between it and the
door frame.
The maximum distance between the WaveNet
Lock Node and the locking
cylinder, however, is 35 cm.
The WaveNet Lock Node should be
installed at the height of the locking
cylinder. Ideally it is installed in a
standard flush-type box and lighting
frame with a flush cover.