Unit installation

WaveNet Radio Network 3065
Page 8
6.1 Computers
Using special communication node software (CommNode), computers can be
integrated into WaveNet:
- between the user interface and RS232 port, and
- between the user interface and TCP/IP (Internet, Intranet), and
- between TCP/IP and the RS232 port.
*
1
= LN communicates with the allocated lock via 25 kHz (see Administration Building)
6.2 Router Nodes (general)
WaveNet Router Nodes are basically used to connect two different network segments
together; these two may use the same transmission medium (e.g. RS485/RS485), or
different transmission media (e.g. RS485 cable / 868 MHz radio).
Furthermore, data streams arriving from the segments are filtered by the WaveNet
Router Node so that the only data passed on to the segment downstream from the
WaveNet Router Node is the data which is supposed to be processed by that
Administration
Building
Server with
LSM
Client PC with
SV client
licence
Client PC with
SV client
licence
Client PC with
SV client
licence
Building 1
Building 2
Building 3
Application: Administration of different buildings/halls
(at one location) via existing Ethernet (Intranet)
IP protocol
on existing
Ethernet
(Intranet)