Unit installation

LON – Network 3065
Page 24
10.0 Planning Examples
10.1 Connecting External Buildings via Twisted Pair, Modem & TCP/IP
Remark: The planning and implementation of the following planning examples must
be carried out by SimonsVoss. This chapter therefore offers only a short description
of networking via modem and TCP/IP router.
Bezeichnung Präsentation 4
Building 2
Connection with analog modem
Required components:
Analog SV modem (slave configuration), Central
Node, LPI10, LockNode(s), digital component(s)
Building 2
Connection with analog modem
Required components:
Analog SV modem (slave configuration), Central
Node, LPI10, LockNode(s), digital component(s)
Building 1
Connection with Cat5 cabling
Required components:
Router, LPI10, LockNode(s), digital
component(s)
Building 1
Connection with Cat5 cabling
Required components:
Router, LPI10, LockNode(s), digital
component(s)
Building 3
Connection with LON/IP router
Required components:
LON/IP router (slave configuration), LPI10,
LockNode(s), digital component(s)
Building 3
Connection with LON/IP router
Required components:
LON/IP router (slave configuration), LPI10,
LockNode(s), digital component(s)
T
w
i
s
t
e
d
p
a
i
r
(
C
a
t
5
)
Telephone line
E
t
h
e
r
n
e
t
Server with LDB software
Server with LDB software
Administration Building *1
Connection to Building 1:
The CentralNode is connected to the server via the RS-
232 interface, forming the connection to the SV network.
External buildings can be approached with a twisted pair
cable (900 m/2950 feet as BUS).
Components: CentralNode, LPI10
Connection to Building 2:
The analog modem (master configuration) is connected to
the server via the RS-232 interface of the server, forming
the connection to the external building via a telephone line.
Building 2 receives the data via an analog modem (slave
configuration) and makes the connection to the SV
network.
Components: analog SV modem (master configuration)
Connection to Building 3:
The data is passed on to the LON/IP router via the
interface of the CentralNode that is connected to the
server. This router converts the data so that it can be
passed on to external buildings via an existing
Ethernet. The LON/IP router (slave configuration) in
Building 3 then makes the connection to the SV
network.
Components: LON/IP router (master configuration),
CentralNode, LPI10
*1 Naturally the Administration Building can have its own SV network at any time
*1 Naturally the Administration Building can have its own SV network at any time
Connecting External Buildings Via Twisted Pair, Modem & TCP/IP
Connecting External Buildings Via Twisted Pair, Modem & TCP/IP