Unit installation

LON – Network 3065
Page 7
2.0 The Software
If you use a PC to administer the locking system, you only need the locking plan
software LDB
*1
or LSM
*2
. To access the locking system from more than one
workplace, you must have LSM installed.
In network operation, the LDB
*1
software handles functions for visualisation, filtering,
encoding, network management and data calibration. You can read out, change and
verify all network components. Only trained personnel are permitted to install the
network, in order to guarantee trouble-free function.
*1
LDB = Lock Data Base
*2
LSM = Locking System Management
- Please refer to the chapter on "Commissioning" in the software operating
instructions for information on the system requirements for the locking plan
LDB.
- Please refer to the LSM - Locking System Management handbook for
information on LSM system requirements.
To operate the Network 3065, you must have a license, which depends on the size of
the network. These licenses are available in the following progressive sizes:
For networks with max. 12 LockNodes
For networks with max. 48 LockNodes
For networks with max. 128 LockNodes
For networks with max. 258 LockNodes
For networks with max. 516 LockNodes
For networks with max. 1032 LockNodes