Unit installation

PinCode Keypad 3068
Page 18
Important: Please set the two-time opening protocol (double-click) only when you are
using a SimonsVoss VdS Shuntlock 3066. Otherwise, there may be malfunctions or
unwanted effects.
You can switch from one configuration to the other at any time.
Attention:
It is not possible to enter programming mode when there is a battery
warning. This means that when the battery is weak, you cannot change or delete any
functions. Programming mode will only be available again after you have successfully
changed the battery (see the section "Battery Replacement).
13.2 Miscellaneous
The quasi-proximity and validity and expiry mode functions are not available with the
PIN Code Keypad.
14.0 Technical Specification
Dimensions W x H x D
96 mm x 96 mm x 14 mm
Weight 102 g (incl. batteries)
Material Plastic
Colour Grey with transparent ring
Maximum number of
operations with one battery
set
A
Approx. 100,000 operations or 10 years
on standby
Operating distance from
locking cylinder
Up to a max. of 40 cm (when the transponder
antenna is parallel to the cylinder antenna)
Operating distance from
SmartRelay
Up to a max. of 120 cm (when the transponder
antenna is parallel to the SmartRelay antenna)
Protection class IP 65
Working temperature range -20° C to 50° C (-4° F to 50° F) without moisture
condensation
Battery type 2 x 3 V DC lithium battery type CR2032
Battery replacement Only by trained personnel