Unit installation

Digital Locking System 3060
Page 3
1.0 General Method of Operation
The Digital Locking and Organization System 3060 is modularly constructed and is
suitable for uses ranging from a simple locking system for individual doors all the way
to a complex PC-controlled access control system. Conventional mechanical keys are
replaced by the programmable transponder, which controls doors, gates, barriers,
furniture and elevators, for example, over radio transmission. Each transponder is
programmed individually for the locking system. The access authorisations are
assigned by means of the locking plan. This makes it possible to provide each
employee with an individual locking plan with access control and time zone control.
The identification in the system and the radio transmission are done by sending and
receiving constantly changing crypto codes, thus making the misuse of the system
technically practically impossible. Modifications or expansions of the system at a later
date are always possible.
2.0 The Components of the Digital Locking and
Organization System 3060
2.1 Software LDB
The locking plan software runs under Windows 98, Windows ME, Windows NT/2000
and Windows XP. All components can be programmed as required using the locking
plan software. One locking plan can contain a maximum of 16,386 lockings and 8000
transponders. For even larger locking systems, the lockings and transponders are
distributed among several locking plans. The locking authorisations are assigned by
simply clicking with the mouse. As a result, later modifications are possible with no
trouble.
☺ A detailed description is to be found in our Software Operating Instructions!