Technical data

SMART RELAY SREL, SREL.ZK, SREL.ADV

7.1 ACCESS CONTROL

Only possible in SREL.ZK und SREL.ADV versions. The 1,024 most recent trans-

ponder transactions are logged with the date and time.

7.2 TIME ZONE CONTROL

Only possible in SREL.ZK und SREL.ADV versions. A time zone plan can be up-

loaded and the transponders are approved or blocked according to their time zone

group.

7.3 OVERLAY

Replacement transponders can overwrite their corresponding original transponders.

The original transponder is blocked once the replacement transponder is used for the

first time.

7.4 FLIP FLOP

Pulse mode (default setting) is switched off and the pulse duration no longer plays a

role. When flip flop mode is activated, Smart Relay changes its status from on to off

or vice versa each time it is activated using a transponder. This mode is ideal for

switching lights, machines and other systems on and off.

Where applicable, you should ensure that mains adapters and electric strikes

are suitable for continuous current operation in such an installation.

7.5 REPEATER

Smart Relay receives a transponder signal, which it amplifies and forwards. This func-

tion allows Smart Relay to be used to bridge longer radio transmission paths. The dis-

tance to the next Smart Relay can be up to 2 m.

7.6 TIME SWITCHOVER

For SREL.ZK and SREL.ADV only: when the time switchover is activated, a time

zone plan needs to be uploaded which allows the Smart Relay to remain released

during the indicated times (in Group 5). During the day, the door can be used freely

while only a transponder will open the door at night.

You should ensure that mains adapters and electric strikes are suitable for con-

tinuous current operation in such an installation.