Operating instructions

Manual – LDB 1.5
Page 9
9
Insert the SimonsVoss CD. In Windows Explorer, select the CD-ROM drive and click
on Software > System3060 > English > Setup.exe. Follow the setup instructions.
Once you have finished the installation, restart your computer.
One way to start the program is from the Windows Task Bar. To do this, choose Start
> Programs > System 3060.
The very first time you start the program, the software will check whether a
Configuration tool (see section 1.3) is connected. This will take a few seconds.
Connect your Configuration tool to a free port (i.e. COM1) and click the OK button.
The default setting in the software is for the Configuration tool to be connected to the
COM1 port. If you do not connect the Configuration tool to COM1, a selection box will
open in which you can choose another port. If you are using a SmartCD type
Configuration tool, then you will have to first install the necessary device drivers,
which you will find on the CD-ROM, which comes with the SmartCD. The software
can also detect your Configuration tool on a port higher than COM4 without you
having to make settings yourself.