Operating instructions

Manual – LDB 1.5
Page 81
81
8.4 If a transponder is lost
Normally a new transponder is created and the lost transponder blocked. Open your
Lock System. Click on the name of the transponder (i.e. 12012 Karin Lewis) which
you would like to replace so that it is highlighted.
Choose New > Spare transponder. You will be asked to confirm. If you have chosen
the wrong name, you can change it using the Transponder drop-down box. Otherwise
simply confirm with OK. The crosses in the column of the transponder you have
removed will appear in grey. The new transponder is given the same name but with
the extension -0001.
You can change the name afterwards if required.