Operating instructions

Manual – LDB 1.5

Page 74

This will give you an overview of the most recent access events. You can set the

number of saved accesses between 0 and 10000 by entering the amount in

memorize last and clicking Save. You can save or print out this list. To close the

window, click Exit.

This list will update itself automatically whenever an Access List is retrieved.

6.5 Retrieving data from transponders

You can also retrieve data from a transponder. Position the transponder in front of the

Configuration tool. Choose Programming > Read transponder. When requested,

briefly press the transponder button.

You will be given information about the number of data sets (i.e. how many Lock

Systems the transponder is authorized to operate in). If the current Lock Plan is open,

the name of the Lock System and the name of the transponder and its time zone

group will also be displayed. The status of the transponder battery and the

transponder’s software version will be shown at the bottom left. If you would like to

retrieve data from more transponders, click on the Read button, otherwise click Exit.

When retrieving data from a transponder, it is simultaneously marked in the

Lock Plan.