Operating instructions

Manual – LDB 1.5
Page 71
71
6.0 Retrieving data from a component
6.1 Retrieving data from a lock
Position the lock in front of the Configuration tool. Choose Programming > Read
Unknown Lock. You will be given the following information:
Lock System ID Name and ID number of the Lock System
Lock ID Name and ID number of the lock
Software version Software version of the lock
Status Battery status of the lock
Data errors
Backup battery active
Emergency release active
Deactivated (if alarm system is armed)
Flip-flop on
Configuration Configuration of lock
When retrieving data from a known lock, it is simultaneously marked in the
Lock Plan.