Operating instructions

Manual – LDB 1.5
Page 65
65
5.0 Master level
5.1 Setting up a master level
A master locking level has to be set up if you want a transponder to operate in more
than three Lock Systems.
Instead of having the transponder learn more and more passwords (the password of
the 3rd Lock System is the limit of its capacity), the way it is done is to teach all of the
locks (US Locks, SmartRelays, etc.) – no matter which Lock System they belong to –
another password: the password of a ‘master level’.
Take the fire department’s password as an example:
A fire department transponder which has been programmed with this password, and
the appropriate authorization, can operate all of the locks that have been
programmed with this additional fire department password and authorization –
regardless of which Lock System the locks belong to (assuming the Lock Systems’
owners have agreed to this).
To program a master locking level, please proceed as follows:
Choose New > Master level.
Enter the name of the master level (i.e. fire department). The ‘fire department’ must
now enter its personal password twice (i.e. fire)
The password is shown in asterisks for security reasons
A lock can differentiate between up to three master levels (symbolically green,
blue and red). All of the transponders within a master level have the same
rights.
Now select a level: green, blue or red (i.e. Red).
Click OK & Continue if you would like
to create more levels, otherwise click
OK & Finish.