Operating instructions

Manual – LDB 1.5
Page 61
61
If you need to reduce the number of existing SmartOutput Modules in your Lock
System, you can change the total number of extension modules (max. 16) in the Lock
properties of the SmartRelay (i.e. for the Admin building elevator) under Configuration
> Advanced functions.
If the number of modules is changed, then modules that have already been
programmed may require programming again. The associated lock IDs (LIDs)
may also change too.
The software automatically deletes the corresponding locks (outputs) in the module
with the associated module address (i.e. Lift admin building_Mod#2_Out#1 to Out#8).