Operating instructions

Manual – LDB 1.5
Page 55
55
In the SmartRelay’s configuration screen, you can define the number of SmartOutput
Modules. A maximum of 16 SmartOutput Modules can be entered in the configuration
screen of each SmartRelay Advanced. Depending on the configuration you then
define (with/without signalling), you will therefore have available to you a maximum of
64 outputs (with signalling) or 127 outputs (without signalling) plus 1 output on the
SmartRelay.
The newly created lock will then appear in the Lock System together with the
associated SmartOutput Modules. The SmartOutput Modules are always given a
unique allocation (i.e., Lift main building_Mod#0_Out#1).
Elevator main building
→
Name of the lock (of the SmartRelay belonging to the
SmartOutput Module)
Mod#0
→
Address of the SmartOutput Module in HEX format (0-F)
Out#1
→
Address of the output of the SmartOutput Module (1–8)