Operating instructions

Manual – LDB 1.5
Page 43
43
4.0 Configuring the components
4.1 Digital US Lock
If necessary, you can configure digital US Locks to remain engaged for a longer
period of time (approx. 10 seconds).
Doing this reduces the lifespan of the battery.
Open your Lock System for modification. Select the US Lock you would like to
configure (i.e., Main entrance)
Choose Edit > Properties, then click the Configuration tab. Click on Long release
and confirm with OK.
Approve your Lock System, and then program the digital US Lock.
Lock software version 10.2 and above provides you with the option of configuring the
lock in such a way as to log any access attempts by an unauthorized transponder.
Only transponders from your own Lock System are logged, since transponders from
other lock systems cannot communicate with your US Locks, so therefore cannot be
recorded.
Open your Lock System for modification. Select the US Lock you would like to
configure (i.e., Main entrance).
Choose Edit > Properties, and then select the Configuration tab. Click on Log
unauthorized accesses and confirm with OK.