Operating instructions

Manual – LDB 1.5
Page 41
41
Choose Edit > Properties. Click on the Time control tab and choose the Lock
System and the relevant group (i.e., Lock System: Sample and Time zone group:
Group 1).
Confirm with OK.
Enter your groups one after the other, as described previously. For transponders that
do not belong to a time zone group (authorized to use the lock 24 hours a day, every
day), proceed as follows:
In the Time zone group tab, choose No time restriction or, alternatively, do not
select the transponder at all in the first place.
An overview of time groups, which you can save and print out, is available at View >
Time zone groups.