Operating instructions

Manual – LDB 1.5
Page 40
40
A programming flash will appear behind the name of the lock. This means that the
lock has to be reprogrammed. Approve the Lock System and program the lock
(Programming > Lock).
The clock signifies time zone control for this lock.
Since certain public holidays do not always fall on the same date, the holiday
list has to be regenerated after two years. The affected locks must be
reprogrammed. Changes do not have to be made to the time zone plan or the
holiday list. When the holiday list expires, the locks involved will automatically
be marked as requiring programming (yellow flash behind the lock).
Warning: The date and time of the computer are used, so check that these
settings are correct.
3.6 Allocating time zone groups
If the Lock System is approved, then open it for modification. Select the transponder
to be assigned a time zone group (i.e., 12012 Karin Lewis).