Operating instructions

Manual – LDB 1.5
Page 17
17
2.5 Authorizing transponders for specific times and dates
Choose New > Transponder. Allocate a name (i.e., Assistant). Click on the Validity
Period button. You can now define an activation date and/or an expiry date, either of
which can be up to six months in the future. Uncheck the relevant box using the left-
hand mouse button, then click on Change. Enter the required date and time.
For example: Validate date 04/06/2006, 8:00AM, Expiration Time 05/17/2006,
3:00PM.
Transponders with validity dates can only be programmed in a single Lock
System. The level of inaccuracy is approximately 1% of the time period
defined. If the transponder is given a new date, or if its expiration time lapses,
then it is first reset, after which it will be available once again for programming.
Confirm your entries with OK.