Operating instructions

Manual – LDB 1.5
Page 154
154
Now all you have to do is select the event and configure it. There are four types of
events available, and the pages that follow describe them and their configuration.
17.11 Configuring input events
You can connect door contacts and bolt contacts to the network nodes. If the status of
a contact changes the Lock Node will inform the software of this change. Of course,
the Lock Node must be configured to check its inputs constantly (section 15.10).
Select Input event as the event type, and click Configure event. Specify whether
you want the event to relate to Input 1, Input 2, or Input 3.
Choose whether the event is to be that the input closes (from 0 to 1), that it opens
(from 1 to 0), or that the input changes in either way.