Operating instructions

Manual – LDB 1.5
Page 140
140
The software will use the date and time stored in your computer, so you
should check these before synchronizing.
16.8 Task Manager
You can use the Task Manager to plan certain network tasks.
For example:
1. Activate the main entrance locks at 9AM every morning and deactivate them at
7PM each evening.
2. Program the Lock System at 8PM each evening.
3. Continuously retrieve the Access Lists from the relevant doors.
For these functions to work, the computer (operating system: Windows NT/2000/XP)
on which the Lock Plan software is installed must be permanently turned on. The
screen saver can be active, but the Lock Plan must be open for modification.
Choose Network > Task Manager and when it opens, click New. The following tasks
are available: set output, reset output, perform remote opening, test Lock Node,
activate lock, deactivate lock, emergency release, program locks and retrieve Access
Lists. Choose the task you require (next to Type:).