Operating instructions

Manual – LDB 1.5
Page 139
139
You will receive a list of the most recent accesses. The number of accesses saved
can be set between 0 and 10,000.
Click Save, then Exit.
16.7 Synchronizing the time
If the time stored in the locks does not correspond with the actual time, you can use
this command to reset the time in the locks. Choose Network > Clock Adjustment.
Select the Lock System. If you would like to set the time in all the locks, click OK.
Otherwise, uncheck the All locks box then select the locks you want to set and
confirm with OK.
You can select multiple locks using the Ctrl key.