Operating instructions

Manual – LDB 1.5
Page 13
13
If you clicked OK & Continue, you can now define more locks. Simply enter the door
name and confirm by pressing Enter.
Note: If the type of lock changes, then mark it accordingly.
Warning: You cannot change a SmartRelay type lock to any other type of lock
after it has been defined.
The locks you have set up will now appear at the left-hand side of the screen.
The yellow flash to the right of the lock signifies that changes have been made
to the lock definition but not yet programmed into the lock.
If you do not want to make any more entries, click the Finish button.