Operating instructions

Manual – LDB 1.5
Page 125
125
Yellow Problem in the radio connection between Lock Node and lock (caused by an
open door, for example).
Red Connection between PC and Lock Node interrupted. In this case, check the
batteries in the network node.
You can obtain a list of the network addresses of all the locks under View >
Network addresses.
15.7 Adding network nodes
Click Manage network nodes. Choose the group concerned, and enter the Member
IDs of the Lock Nodes. Click Add. Network nodes that have not been registered
cannot be contacted. You can only add new Lock Nodes that have not been
programmed.
Once you have registered all of the Lock Nodes, click Exit. In Network Setup, click
the Implementing new nodes button. The software will transmit the network
password. You can then configure the Lock Nodes.