Operating instructions

Manual – LDB 1.5
Page 123
123
15.5 Assigning/changing the network password
Data communication between the software and the individual nodes can be encoded
using a network password. If you change this password, you must inform all of the
network nodes that you have done so. Click the Network password button. If you
have not assigned a password yet, then simply leave the upper box empty. Enter your
new password (i.e. NET) and confirm it. The characters of the password are shown
as asterisks so that someone looking over your shoulder can not read it.
Confirm your entry with OK. The password will be sent to all of the network nodes.
This programming procedure must not be interrupted, otherwise it will no
longer be possible to communicate with parts of the network.
15.6 Configuring network nodes
The Lock Nodes are configured to the associated locks. If the locks have already
been programmed, then you can choose All groups and All nodes, then click
Automatic configuration. The network nodes will retrieve the data from their locks,
and automatically assign themselves to them.
A simpler and quicker way is to program the Lock System beforehand using
the Configuration tool.