Operating instructions

Manual – LDB 1.5
Page 119
119
15.0 Setting up a network
15.1 Setting up a CentralNode
Connect the CentralNode to a free serial port on your PC (i.e. COM1). Choose
Options > Comport.... Select the appropriate port for the CentralNode. If the Config
Device and CentralNode are to be used alternately on a shared port, then you have to
set the current device in this window (i.e. Central Node on COM1 port)
If you have another serial port available for the Config Device, then check that COM
port beneath Config Device.
Confirm with OK.
Choose Programming > Check Programming Interface. The Central Node will
report its current software version.