Operating instructions

Manual – LDB 1.5
Page 116
116
14.0 Special transponders
14.1 Password transponders
Instead of entering the password via the keyboard, you can program a password
transponder. Then, whenever you want to open or approve the Lock System, you
simply press the password transponder in front of the Configuration tool. The
password transponder transmits the password by radio. You cannot create a
password transponder using a normal transponder; a special password transponder
is required.
Choose Programming > Password transponder. Enter the password of your Lock
System (i.e. test). The password letters are shown as asterisks so that the password
can not be read by someone looking over your shoulder.
Confirm the password with OK, and briefly press the push-button on the transponder.
If you want to use the transponder to enter the password from now on, you must
make the following settings:
Click on the Lock System so that it is highlighted. Choose Edit > Properties and then
Authorize with password transponder. Confirm with OK.