Operating instructions

Manual – LDB 1.5
Page 112
112
13.2 Installed lock lengths
You can display the installed lengths of the locks behind each lock name.
Choose View > US Lock length.
European-profile locks have an inside and outside length as measured from the latch
connection to the stated side of the door. US locks are not measured this way but
this version of the software still has these measurements which can be used in any
way you wish. These values have no affect on operation.
You can enter installed lengths as follows:
Select the locks and choose Edit > Properties. Select the Features tab. Enter the
lock lengths.
13.3 Authorization for a transponder
You can create a list of all the locks which a specified employee (transponder) is
authorized to operate. Click on the name of the transponder (i.e. 12012 Karin Lewis)
so that it is highlighted.
Choose Edit Æ Properties. In the window which opens, click the Locks tab.