Operating instructions

Manual – LDB 1.5
Page 100
100
Before importing, you first have to set up a new Lock System in LDB (in this case for
Sampleson Ltd.), along with a password. After that, choose File > Import > Lock
System.
Open the file that contains the names of the locks and transponders (i.e. Sampleson
ltd.csv)
Define whether you want to import the Locks or Transponders. You must also define
the kind of separator used in the .csv file to divide the data entries (Semi-colon, Tab,
Comma).
In our examples, the locks are listed in the first column. This you specify under
Orientation. Confirm with Continue.
In the window which then opens, select the Lock System into which you would like to
import the names.
The software will then set up the locks.
After that, import the transponders in the same way. Assign the authorizations, and
program the components.