Unit installation

Manual – Digital locking cylinder 3061
Page 12
3.3 Overlay mode
This mode applies to the complete locking system and needs to be selected during the
system's design phase. Replacement transponders can overwrite the original
transponders. The first use of a replacement transponder will overwrite and block the
original transponder.
3.4 Extended activation
The cylinder's external or internal knob will engage for approx. 5 seconds as a
default value. The software allows the time to be extended to 10 seconds. This
does not shorten the battery life.
3.5 OMRON
Every product version is operable in OMRON mode. You should select this option for
both the Smart Relay and the cylinder if you want the Smart Relay to transmit
transponder data to a different system and subsequently send a remote opening
command to a cylinder on approval by the other system.
Attention: Cylinders using this configuration cannot be opened by a transponder.
Please refer to the "Smart Relay" manual for a detailed description.
3.6 Warehouse mode
Locking cylinders are delivered in warehouse mode to preserve battery power. Locking
cylinders in warehouse mode cannot be addressed by a transponder. The warehouse
mode is deactivated when the locking cylinder is programmed for the first time. It is
also possible to deactivate the warehouse mode using the programming software
without creating a locking plan.
For warehouse mode after battery warning level 2: see chapter 6.