Unit installation

Manual – Digital locking cylinder 3061
Page 7
2.2 ZK version
Same design as the standard version but with access logging and time zone control.
Access logging The locking cylinder can log the last 3,072 admissions
together with the corresponding date, time and transponder
ID (TID). The data is retrievable at any time using the
programming device or via the network.
Time zone control Locking cylinders can be programmed to grant access to
authorised transponders only at specific times. Each locking
system can handle a maximum of 16,383 different time zone
plans and 5(+1) different time zone groups for each locking
action.
2.3 FH version
Same design as the standard version but for doors with strong metal inserts (fire doors)
or with greater shielding effectiveness. This version is recommended for use in areas
with strong fields of interference, for instance in server rooms and for all metal doors.
The FH version cannot be retrofitted.
This cylinder version is recommended for networked locking cylinders as it makes
project planning easier.
2.4 TS version
Same design as the standard version but with the additional option of engaging the
cylinder from the inside without the use of a transponder. Two buttons on the internal
knob allow this cylinder version to be engaged mechanically. In other words, the door
can be operated from the inside without the use of a transponder. The cylinder
engages for approx. 5 seconds, allowing the door to be opened or locked. The cylinder
rotates freely again after the time period has lapsed.
The .TS version cannot be retrofitted.
2.5 MS version
Locking cylinder 3061 is also available in brass (high gloss) as an alternative to
stainless steel.