Unit installation

PinCode Keypad 3068
Page 14
9.0 Opening
In order to use the PinCode Keypad to open the associated locking, proceed as fol-
lows:
Enter a PIN that has already been programmed. You are not permitted to wait more
than 5 seconds between the entries of the individual numbers.
In you have entered the correct number and the integrated transponder has been
programmed, the LED lights GREEN and a signal is sounded. Then the integrated
transponder opens the locking.
10.0 Meaning of the LED
The built-in LED can light in one of three colours: green, yellow and red. These
colours have the following meanings:
• Green Digit that was input has been accepted
PIN input was OK, which means that
the correct PIN has been recognised, open signal is being sent
PIN length OK
PIN programming procedure was successful
• Yellow battery warning
• Red PIN input was incorrect
Input of master code was incorrect
Repeated incorrect input of the PIN (manipulation)
PIN length was not entered correctly.