Unit installation

LON – Network 3065

Page 12

4.4 LockNode Inputs and Outputs

Terminals 3 to 8 are available for floating inputs or one output. The inputs transmit the

state of the door or lock contact, for example. However, you can also incorporate

external systems, such as motion detectors, photoelectric barriers, etc., into the

system and then also report their signals to the central computer. You can use the

output to pass on signals to external systems, such as heating, light, etc.

You can use the internal power

supply of the node to connect

switches or contacts without a

separate power supply and with-

out a ground connection.

Follow the technical

specifications for the inputs or

the output when connecting

them. Refer

to the data sheet for this

information.

Connection of contacts which don’t have their

Connection of contacts with own power supply

External antenna