Unit installation

WAVENET RADIO NETWORK 3065
Page 29
14.0 DISPLAY OF OPERATING STATUSES AND LED DISPLAYS.
14.1 WN.RN.(XX), WN.LN.C
¾ Power-on reset: 2 x short red flashes
¾ Link quality between two WN.RN.R by activating button on baseboard:
1/2 flashes of signal LED Æ Transmission and reception power poor
3/4 flashes of signal LED Æ Transmission and reception power OK
5/6 flashes of signal LED Æ Transmission and reception optimal
14.2 WN.RN.R, WN.CN.(X)R, WN.RN.ER
¾ If the green LED flashes slowly, listening mode is active or
¾ flashes quickly, communication is present with the LockNode
¾ Red LED off
14.3 Node defect (through self-test)
¾ Continuous red light: Hardware defect
14.4 WN.RN.(X)C, WN.CN.(X)C: Master
¾ Red flicker, green LED off: No segment slave found (cable is defective or no
functioning slave)
14.5 WN.RN.C(X), WN.LN.C: Slave
¾ Red flicker, green LED off: No segment master found (cable is defective or no
functioning slave)
For 14.4-5: Flickering of both LEDs means everything is OK.