Unit installation

WAVENET RADIO NETWORK 3065
Page 5
1.0 INTRODUCTION.
In the text that follows, the components of the System 3060 (locking cylinders, Smart
Relays, shunt lock) are always referred to as lock(s) and door(s). Unless explicitly
stated otherwise, the information given applies to all other components of the System
3060.
Up to a certain system size, or for customers with a small number of doors, it is
advisable to program the System 3060 with a laptop and SmartCD, as this generally
means that fewer changes have to be made to the lock configuration.
For medium-sized or larger systems where lost keys, authorisation for new
transponders and organisational changes are more frequent, it is advisable to update
and maintain the locking system over the network. However, not all doors necessarily
need to be networked. The entire system can be configured for combined operation
(networking / stand-alone).
In a networked system, not only can all maintenance and programming tasks be
performed on a central PC, the current status of the entire network can be
interrogated. You can query lock and door statuses such as Door open – Door
closed, Door unlocked – Door locked, Battery warning and Access list from a central
point. This allows you to respond directly to an event from a central point.
WaveNet is a simple-to-install ‘plug and play’ network for use in building automation.
Because it is installed with no wires, it is particularly suitable for online administration
and management of the SimonsVoss digital locking and organisation system 3060 in
existing buildings; it can however also be used in new buildings (e.g. in flexible-use
areas).
Data transfer within a WaveNet network depends heavily on the transmission
medium. Data can be transmitted via RS485 interfaces, Ethernet interfaces (TCP/IP),
USB interfaces, RS232 interfaces, radio interfaces (868 MHz) and also WLAN.
In summary, networking allows the entire access control system to be configured and
monitored from a central PC. This enables the user to respond immediately to critical
situations.
We would recommend that you take advantage of the WaveNet training offered at
SimonsVoss or WaveNet project planning with a SimonsVoss service technician.